PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
January 14, 2026Applied Sciences0 citationsOpen Access

Identification of Noise Tonality in the Proximity of Wind Turbines—A Case Study

View Full Paper
WKWolniewicz KatarzynaZAZagubień Adam

Key Points

  • The study aims to analyze the tonality of sound emitted by wind turbines into nearby environments.
  • Conducted noise monitoring at a residential area near wind turbines
  • Utilized Fast Fourier Transform (FFT) for tonality assessment
  • Implemented an action plan with the wind farm operator to reduce noise emissions
  • Successfully reduced tonal noise from wind turbines
  • Identified critical tonal sources through active listening and FFT analysis
  • Highlighted risks of incorrect tonal source identification during field measurements

Abstract

This paper presents a study of the tonality of sound emitted by a wind farm into the surrounding environment. The wind turbines installed at the site have a rated power of 3.0 MW. The aim of the study was to analyse the tonality of sounds in the environment at the nearest residential area. The issue of tonal noise near the wind farm was identified during routine periodic noise monitoring. An experienced survey team identified the phenomenon and carried out preliminary field analyses. Detailed studies were then carried out to identify the environmental hazard and failure-free operation of the turbines. The recorded acoustic events are described in detail and an in-depth analysis is carried out. An action plan has been implemented in consultation with the wind farm operator to reduce tonal sound emissions to the surrounding environment. As a result of these interventions, tonal noise from the wind turbines was successfully reduced. It was determined that the detection of the potential tonality of the sounds emitted by wind turbines should take place during the analysis (active listening) of the .wav file, synchronised with Fast Fourier Transform (FFT) analysis. Conducting tonality assessments solely during field measurements may lead to incorrect identification of tonal sources.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Katarzyna et al. (2026) studied this question.

synapsesocial.com/papers/6966e71813bf7a6f02bff68dhttps://doi.org/10.3390/app16020734
Ask AI
Helpful
Bookmark
Share
View Full Paper