Widely used in treating oil mist aerosols generated from metalworking processes, conventional gas–liquid coalescing filters face drawbacks such as increased energy consumption, performance limitations, and shortened service life due to high steady-state pressure drop. To address these issues, this study proposes an innovative design for a filter based on wettability-regulated gradient pore structure. Using glass fiber filter media with different pore size parameters as the substrate and incorporating an intermediate mesh layer, a three-layer filtration structure of “large-pore filtration layer—mesh layer—small-pore filtration layer” was constructed. The surface wettability of each layer was regulated by a self-developed surface modifier, producing gradient pore structure filters with different wettability configurations. The variations in key performance parameters, including steady-state pressure drop, filtration efficiency, saturation, and service life, were systematically evaluated for these configurations. Experimental results demonstrated that the configuration with an “oleophobic large-pore filtration layer—mesh layer—oleophilic small-pore filtration layer” yielded the best overall performance. Analysis based on the “jump-channel” model indicated that the gradient pore structure achieves progressive droplet filtration and optimizes droplet coalescence and capture through wettability differences. Consequently, while maintaining exceptional filtration efficiency (>99%), this configuration significantly reduces the steady-state pressure drop by over 34% and effectively extends the service life by more than 66%. This wettability-regulated gradient pore structure provides a novel technical pathway for addressing the challenges of balancing pressure drop and filtration efficiency, as well as extending the service life, in gas–liquid coalescing filters.
Yang et al. (2026) studied this question.