Sludge management is one of the most costly and technically challenging components of municipal wastewater treatment, highlighting the need for sustainable and low-cost stabilization technologies. This study evaluated a pilot-scale vermifiltration system for municipal sewage sludge stabilization under varying hydraulic and organic loading conditions. Three vermifilter pilots incorporating Eisenia andrei earthworms were operated using lightweight expanded clay aggregate (LECA), high-density polyethylene (HDPE) plastic media, and mineral pumice. The systems were tested at hydraulic loading rates (HLRs) of 150, 300, and 450 L/m2·d. Performance was assessed using chemical oxygen demand (COD), total solids (TS), volatile solids (VS), VS/TS ratio, sludge volume index (SVI), and sludge dewaterability indicators, including specific resistance to filtration (SRF) and time to filtration (TTF). Optimal performance occurred at an HLR of 150 L/m2·d, achieving maximum reductions of 49% in COD, 30% in TS, and 40% in VS, along with an SVI reduction of up to 78%. Increasing HLR significantly reduced treatment efficiency due to shorter retention times and biofilm washout. A regression analysis showed the strongest association between COD removal and organic loading rate (R2 = 0.63) under the coupled HLR–OLR conditions tested, while weaker correlations were observed for SVI and VS/TS. Dewaterability improved markedly after vermifiltration, particularly in the LECA-based system. Although filter media type did not significantly affect COD or SVI removal, pumice and plastic media provided greater hydraulic stability at higher loadings. These results demonstrate that vermifiltration is an effective and environmentally sustainable option for municipal sludge stabilization when operated under controlled hydraulic conditions.
Taheriyoun et al. (Mon,) studied this question.