Ice accumulation on power transmission lines poses serious threats to operational safety and can lead to substantial social and economic impacts. While various anti-icing coatings have been investigated, their performance is often limited by the effectiveness and durability of anti-icing. Slippery lubricant-infused porous surfaces (SLIPSs) have shown remarkable anti-icing properties and durability, aided by their lubricant-infused and self-healing capability. In this study, SLIPSs were successfully fabricated on aluminum substrates using a two-step anodization process. The effects of the anodizing parameter of the current density on pore diameter and depth at each stage were systematically investigated. Compared to untreated aluminum and superhydrophobic coatings (SHCs), SLIPSs presented good anti-icing properties. First, at −6 °C, droplets slid off the surface completely within 4340.5 ms without pinning, indicating sustained droplet-shedding capability. It also significantly delayed ice formation, extending the freezing time to 80 min—eight times longer than that of the untreated surface. Moreover, the SLIPSs also exhibited ultra-low ice adhesion, with an initial strength of only 6.93 kPa. Meanwhile, after 100 frosting–defrosting cycles, SLIPSs could still maintain low ice adhesion strength (<20 kPa). The prepared SLIPS with a Y-shaped pore structure demonstrates good potential for anti-icing.
Yan et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: