Abstract Background Haemodialysis (HD) and online haemodiafiltration (OLHDF) are the main in-centre treatments for kidney failure. Both rely on high water and energy use and produce substantial greenhouse gas emissions. OLHDF provides superior solute clearance and improved survival compared with high-flux HD, but its environmental burden remains less defined. Clarifying these differences supports evidence-based and sustainable treatment decisions. Methods A process-based life cycle assessment (LCA) was performed at the Nephrology, Dialysis and Kidney Transplant Unit, AOU Policlinico di Modena, Italy, in 2024, following ISO 14040 and 14,044 standards. The functional unit was one patient year of treatment, equal to 156 sessions. System boundaries included procurement, water treatment, session operations, travel and waste management. Modelling used OpenLCA with Ecoinvent 3.11 and the Italian electricity grid factor of 0.25 kg CO2 per kWh. Scenarios assessed HD-only, OLHDF-only and the real-world Modena treatment mix. Sensitivity analysis varied the share of OLHDF, session frequency, grid intensity and reverse-osmosis (RO) recovery rate and included a reduced-flow OLHDF prescription. Results The annual footprint was 4469 kg CO2-eq, 60,290 MJ and 1364 m3 world-eq deprived water per patient year. HD generated 4427 kg CO2-eq and OLHDF 4548 kg CO2-eq, reflecting slightly higher electricity and water consumption and greater plastic use in OLHDF. Travel contributed 71% of total emissions and procurement 21%. Sensitivity analysis showed changes in RO efficiency and electricity mix had stronger effects than treatment type. Conclusions HD and OLHDF have comparable environmental profiles. Clinical outcomes should drive modality choice, while sustainability gains depend on improving transport, water recovery, energy management and renewable integration.
Larkin et al. (2026) studied this question.