Background/Objectives: The main objective of optimizing the composition of dental implants is to improve tissue compatibility for enhanced biological/biochemical performance. In this context, research on the development of new titanium alloys in dental implantology considers the careful selection of alloying elements, both in terms of biocompatibility (their lack of toxicity) and their potential to improve the metallurgical processing capacity (thermal and/or thermomechanical), which through controlled microstructural changes lead to the optimal combination of properties for functionality and durability of the implant. The purpose of the research is to study the influence of alloying elements on the phase composition and physical–mechanical properties of experimental titanium alloys. Methods: Four alloys with original chemical compositions were developed, coded in the experiments as follows: Ti1, Ti2, Ti3, Ti4. The characterization of the alloys was carried out by detailed analysis of the chemical composition, phase structure and by testing the physico-mechanical properties (HV hardness, tensile strength, yield strength, elongation, modulus of elasticity), by standardized modern methods. Characterization methods, such as optical microscopy, SEM, EDS and XRD were performed, followed by tensile tests based on ASTM EB/EBM-22 and EN ISO 6892-1-2009 standards. Results: The research results provide information regarding the relationship between the composition and the physico-mechanical properties (Rm, Rp, HV, A, G, E) of the experimental alloys (Ti1–Ti4). Depending on the value level of the properties, these have been highlighted: compositions in which the alloy can be indicated for conditions of intense stress (Ti3), compositions that describe highly ductile alloys, easy to process and adapt to clinical requirements (Ti4), but also alloys compositions characterized by a balanced combination of strength, plasticity/ductility (Ti1, Ti2). Conclusions: Research for the development of new titanium alloys through the optimization of chemical composition has taken into account the requirements regarding the biological/biomechanical compatibility of biomaterials. Analyzed in comparison with Cp-Ti grade 4 and Ti6A4V, the experimental alloys (Ti1–Ti4) can be characterized as follows: The mechanical strength properties (Rm and Rp) are higher than those of pure commercial titanium (Cp-Ti grade 4) for all compositions Ti1–Ti4, but slightly lower than those of alloy Ti6Al4V. The plasticity–ductility properties have values comparable to those of Cp-Ti grade 4 (Ti4 and Ti2 compositions) and Ti6Al4V (Ti1 composition), with one exception, the Ti3 alloy. All four experimental alloys have a lower modulus of elasticity than Cp-Ti grade 4 (102–104 GPa) and Ti6Al4V (113 GPa), commonly used in dental implants. An in-depth analysis, which will also consider information on corrosion behavior and cellular testing, may support the selection of some of the four experimental alloys studied. The research aims to continue the progress to a higher level of testing, through the realization of dental implants (e.g., fatigue, wear, osteointegration capacity, etc.).
Vasilescu et al. (2026) studied this question.