Menstruation, a biological phenomenon experienced by more than half of the global population, remains stigmatized and poorly addressed in the context of research and public discourse. One overlooked issue is that of “period pollution,” the waste generated by millions of feminine hygiene pads (menstrual pads) that end up in landfills or the environment. Simultaneously, Japanese knotweed (Reynoutria japonica), a non-native invasive plant which disrupts native species, leads to the disruption of ecological systems. This experimental study assesses the Japanese knotweed plant for its potential to serve as the absorbent core in a sustainable menstrual pad, helping to address both environmental challenges in tandem. As control groups, commercial pads (Natracare and Saathi) were tested for their performance as absorbent materials, as defined by the absorbency ratio (AR) test. All preliminary studies were done using normal saline solutions dyed with red food coloring. Saathi pads demonstrated significantly higher levels of AR compared to Natracare and knotweed pads due to the presence of superabsorbent polymers, making it an unreliable benchmark. Because Japanese knotweed is composed of cellulosic fibers that absorb water through hydrogen bonding to hydroxyl groups and capillary imbibition within porous fiber networks, lignin removal via alkaline processing was employed to enhance absorbency prior to experimental testing. The inner lumen of the knotweed was selected and delignified using a sodium hydroxide bath, later being shaped into an absorbent core akin to the measurements of the commercial pads and inserted into Natracare shells for proof-of-concept testing. Although knotweed-based pads exhibited lower AR values than Natracare, the testing places the knotweed prototype at approximately 40% of the fluid capacity, indicating a strong starting point for a natural fiber. To further evaluate the processing feasibility of Japanese knotweed beyond laboratory-scale pad prototyping, Japanese knotweed biomass was subjected to conventional Kraft pulping, which helps to remove lignin and increase absorbency. The Kraft pulping produced a moderately delignified brown pulp with a Kappa number of 20. Due to limiting factors, the absorbency of the pulp was not tested. However, the pulp’s fiber dimensions were comparable to hardwood pulps that are commonly used in absorbent applications, suggesting feasibility for future development into bleached fluff pulp and sustainable menstrual hygiene products.
Tuzel et al. (Sat,) studied this question.