PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 26, 2026Energies0 citationsOpen Access

Experimental and Numerical Investigation of Pore-Scale Remaining Oil Mobilization Mechanisms Under Variable-Rate Waterflooding

LZL. ZhaoResearch Institute of Petroleum Exploration and DevelopmentCZCunyou ZouResearch Institute of Petroleum Exploration and DevelopmentYMYushan MaChina University of Petroleum, Beijing

Key Points

  • To understand how different water injection rates affect the mobilization of remaining oil in sandstone reservoirs.
  • Conducted variable-rate waterflooding experiments on sandstone cores
  • Used X-CT-based pore-scale geometric models for simulations
  • Evaluated effects of displacement rate, wettability, and oil viscosity through orthogonal experimental design
  • Optimal displacement rate identified as 2-3 mL/min
  • Low rates were ineffective for oil mobilization
  • High rates caused fingering and reduced displacement efficiency
  • Displacement rate and wettability were the dominant factors affecting mobilization

Abstract

In the late high water cut stage of medium- and high-permeability sandstone reservoirs, remaining oil becomes highly dispersed, and rational optimization of the water injection rate is crucial for further recovery improvement. However, a quantitative relationship between pore-scale remaining oil mobilization and macroscopic displacement efficiency is still lacking, limiting mechanistic guidance for field-scale rate optimization and water cut control. To address this issue, variable-rate waterflooding experiments were conducted on medium- and high-permeability sandstone cores to establish the relationships among displacement rate, injected pore volume multiples, and oil displacement efficiency and to identify the optimal rate. In addition, an X-CT-based heterogeneous pore-scale geometric model and a series of idealized pore-throat models were used for oil–water two-phase flow simulations. Combined with an orthogonal experimental design, the effects of displacement rate, wettability, oil viscosity, interfacial tension, and pore structure parameters on remaining oil mobilization and displacement efficiency were systematically evaluated. The results indicate an optimal displacement rate of 2–3 mL/min. At low rates, remaining oil cannot be effectively mobilized, whereas excessively high rates intensify fingering and channeling along high-capacity pathways, reducing the final displacement efficiency. Simulations further show that a moderate rate increase markedly lowers remaining oil saturation, while overly high rates induce severe channeling. Orthogonal analysis reveals that displacement rate and wettability are the dominant factors, with normalized weights of 46.3% and 30.5%, respectively. Larger pore diameters, smaller pore-throat ratios, and higher coordination numbers reduce mobilization pressure and remaining oil saturation. This work elucidates pore-scale remaining oil mobilization kinetics under variable-rate waterflooding and provides a quantitative microscopic basis for rate optimization and fine-scale remaining oil exploitation in mature waterfloods.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Zhao et al. (2026) studied this question.

synapsesocial.com/papers/699fe37b95ddcd3a253e7616https://doi.org/10.3390/en19051121
Ask AI
Helpful
Bookmark
Share
View Full Paper

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Effect of High-Multiple Water Flooding and Layered Allocation on Oil Displacement Efficiency in Unconsolidated Sandstone Reservoirs2025 · 1 citations
  2. 2Preliminary Investigation of Fracture Behavior during Carbon Dioxide Fracturing of Natural Hydrogen Reservoir with Hard-Core Imperfections2026 · 32 citations
  3. 3Novel Method for Inverted Five-Spot Reservoir Simulation at High Water-Cut Stage Based on Time-Varying Relative Permeability Curves2020 · 23 citations
  4. 4Pore-scale imaging and modelling2012 · 2,004 citations
  5. 5Segmentation of X‐ray computed tomography images of porous materials: A crucial step for characterization and quantitative analysis of pore structures2009 · 627 citations