Low-frequency acoustic fields—common in ventilation ducts, building façades, and industrial infrastructure—remain an underutilized source for ambient energy harvesting, particularly in humid environments where conventional contact-based or mechanically resonant harvesters may degrade over time. This study introduces a theoretical framework for converting acoustic pressure oscillations into electrical power through acoustic–electrokinetic coupling and proposes the Acoustic Baroionic Harvester (ABH) as a solid-state concept combining a Helmholtz resonator with a charged nanoporous membrane. The model is derived from coupled electrokinetic and fluid-mechanical governing relations, leading to closed-form expressions for the open-circuit voltage, internal electrokinetic resistance, and maximum deliverable power as functions of membrane surface charge, electrolyte properties, pore geometry, and resonance-induced pressure amplification. Numerical simulations are performed to validate the analytical scaling laws and to determine operating regimes that maximize power transfer to an external load. Under representative low-frequency acoustic excitation, the ABH predicts open-circuit voltages on the order of tens of millivolts and maximum power densities in the sub-microwatt-per-square-centimeter range. A compact CAD conceptual design tuned to approximately 120 Hz with a moderate resonance quality factor supports the feasibility of practical integration. The proposed approach enables micro-power generation from persistent low-frequency acoustic sources and provides a physically grounded pathway for self-powered sensing applications in built and industrial environments.
Guerra et al. (Wed,) studied this question.