PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 3, 2026SHILAP Revista de lepidopterología2 citationsOpen Access

Plant derived corrosion inhibitor for copper: Integrated electrochemical and molecular insights into Ailanthus altissima seed extract performance in saline media

View Full Paper
MGMohammad Reza GholizadehAGAli GhaffarinejadMAMohammad Mahdi Alemnezhad

Key Points

  • Ailanthus altissima seed extract shows corrosion inhibition efficiency reaching 94% in 3.5 wt% NaCl solution, promising as a sustainable alternative.
  • Electrochemical measurements—PDP and EIS—confirm AASE acts as a mixed-type inhibitor by forming a protective film on the copper surface.
  • Molecular dynamics simulations identify 3-benzyloxy-2-fluoro-4-methoxy as the primary component for effective surface passivation.
  • Surface characterization techniques confirm the adsorption of AASE is temperature-dependent, following the Langmuir isotherm model.

Abstract

The search for environmentally friendly corrosion inhibitors has intensified as a sustainable alternative to toxic synthetic chemicals. This study reports, for the first time, the use of Ailanthus altissima seed extract (AASE) as a green inhibitor for copper corrosion in 3.5 wt% NaCl solution. What makes this research unique is that the seeds of this deciduous tree are naturally abundant, cost-effective, and environmentally friendly, making them an attractive, sustainable source of inhibition agents. Gas chromatography-mass spectrometry (GC-MS) and Fourier transform infrared (FT-IR) spectroscopy analysis confirmed the presence of heteroatom-containing phytochemicals (N, P, O, F) in AASE, suggesting its strong inhibitory potential. Electrochemical measurements, including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS), demonstrated that AASE acts as a mixed-type inhibitor, reducing corrosion by forming a protective film, with inhibition efficiency ( IE% ) reaching up to 94 % as further confirmed by weight loss tests. However, IE% decreased with rising temperature, indicating a temperature-dependent adsorption mechanism. Surface characterization via atomic force microscopy (AFM), scanning electron microscopy (SEM), and contact angle analysis confirmed inhibitor adsorption and surface modification. Adsorption studies revealed that AASE obeys the Langmuir isotherm at 298–338 K. Molecular dynamics (MD) simulations identified 3-benzyloxy-2-fluoro-4-methoxy (BABFM) as the most active constituent responsible for strong surface passivation. Overall, these findings establish AASE as a promising, sustainable, and eco-friendly corrosion inhibitor for copper in chloride-rich environments, offering a viable alternative to conventional synthetic inhibitors.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Gholizadeh et al. (2026) studied this question.

synapsesocial.com/papers/69a760dcc6e9836116a2dffehttps://doi.org/10.1016/j.nxmate.2026.101621
Ask AI
Helpful
Bookmark
Share
View Full Paper