Rapid urbanization has significantly increased energy demand in buildings, which now represent nearly 30% of global energy use. In India, buildings are built across highly varied climatic conditions, from hot-dry and warm-humid to cold, high-altitude areas, making climate-responsive envelope design essential to enhance thermal performance. Among envelope components, roofs are the most exposed to solar and outdoor thermal loads, playing a key role in managing indoor heat transfer. This study offers a parametric analysis of climate-responsive roof design strategies for India’s five main climatic zones, using transient simulations and statistical evaluation. The effectiveness of insulation placement, insulation material and thickness, and external surface absorptivity was systematically assessed based on roof heat gain and heat loss. Results indicate that over-slab insulation can lower roof heat gain by approximately 15–35% compared to under-slab insulation in warm-humid, hot-dry, composite, and temperate zones. In comparison, under-slab insulation decreases heat loss by about 10% in colder areas. Among insulation materials, 50 mm polyurethane foam (U = 0.433 W/m2·K) consistently outperformed extruded polystyrene and expanded polystyrene, achieving 82–83% reductions in maximum heat gain in cooling-dominated climates and 89% reductions in heat loss in cold regions relative to uninsulated roofs. When combined with a white reflective surface finish (α = 0.26), the total heat transfer reduction increased further to 89–92%. Surface treatments alone cut heat gain by 37–51% in non-cold climates, highlighting their potential as cost-effective retrofit options. Statistical analysis confirmed that dry-bulb temperature is the primary climatic factor influencing roof heat transfer (R2 = 0.86–0.98, p < 0.0001), while solar radiation had a weaker effect, especially in optimized roof systems. The findings emphasize the importance of climate-specific roof design and demonstrate that insulation U-value has a greater impact on thermal performance than surface absorptivity, although both are significant. This research offers practical, climate-adjusted guidance for architects, engineers, and policymakers to enhance the thermal performance of roofs in Indian buildings. It supports the development of more resilient, energy-efficient building envelopes.
Gopalakrishnan et al. (Mon,) studied this question.