A Dual-Phase Dual-Path Hybrid Buck-Boost Converter with Offset-Controlled Zero-Current Detection Achieving 95.88% Peak Efficiency

This paper presents a dual-phase dual-path hybrid buck–boost (DPBB) converter with an offset-controlled zero-current detector for Li-ion battery applications. Compared with inductive buck–boost converters, the proposed hybrid converter has a continuous input current, reducing the input voltage (VIN) ripple, which is caused by the parasitic inductance of the bonding wire. The proposed switching operation of the DPBB topology shows a low inductor current ripple with the continuous output delivery current; therefore, the ripple of the output voltage (VOUT) is reduced with the efficiency improvement. Compared with the prior hybrid buck–boost converters, it supports the buck and boost modes only by adjusting the duty cycle, so this addresses the issues of mode transitions. The proposed work utilizes the dual-phase operation to lower the conduction loss and improve the dynamic range. The proposed offset-controlled zero-current detector compensates for the timing error owing to the propagation delay of the control signals to reduce the reverse current from the output. The chip is fabricated using a 180-nm BCD process. It regulates VOUT at 3.3 V with a wide VIN range of 2.8 V to 4.2 V. Peak efficiencies of 95.88% and 93.08% are achieved in the buck and boost modes, respectively, with 140 mΩ of inductor DC resistance.