Effects of Initial Damage on Water-Weakening and Acoustic Emission Characteristics of Bedded Shale

Initial excavation-induced damage may alter water-driven weakening and failure in bedded shale, yet direct experimental evidence from comparable loading–hydration routes remains limited. In this study, uniaxial compression tests with acoustic emission (AE) monitoring were conducted on bedded shale from the Longmaxi Formation in the Sichuan Basin, China, under two routes, i.e., direct saturation (DS) and pre-damage followed by saturation (PDRS), across seven bedding orientations from 0° to 90°. Pre-damage was introduced by loading–unloading to 0.6 of the orientation-dependent peak strength, producing measurable defects and reducing P-wave velocity by an average of 1.23% while preserving the overall anisotropic pattern of wave propagation. Compared with DS, PDRS caused clear mechanical deterioration, with mean reductions of 37.63% in peak strength and 31.14% in elastic modulus. Both routes retained pronounced bedding-angle dependence, although the locations of minimum strength and stiffness differed between them. AE activity in the PDRS group generally initiated earlier and accumulated more persistently before peak stress. RA–AF analysis showed that tensile-like cracking dominated across all bedding orientations in PDRS, whereas the DS group exhibited stronger orientation-dependent variation in cracking mode. The b-value range was also narrower in PDRS than in DS, indicating reduced dispersion of event-size statistics among orientations. Macroscopically, failure evolved from more distributed multi-crack and mixed-mode patterns in DS to more localized dominant-fracture failure with reduced branching in PDRS. Overall, the results suggest that pre-damage before saturation changes the subsequent weakening and fracture development of bedded shale during reloading.