This study presents a characterization method for High-Frequency Current Transformers (HFCTs) intended for partial discharge (PD) measurement in on-line acquisition systems designed for AI-based processing and clustering. The primary objective is to analyze how key design parameters, ferrite core material, and number of turns, influence HFCT frequency response, attenuation, and sensitivity, thereby providing a basis for optimized sensor design when data analysis is to be performed by means of AI-based algorithms. The investigation focuses on the influence of different ferrite core materials and varying secondary turn numbers on the frequency spectrum and the response to IEC 60270-compliant calibrator impulses Both concentrated and well-distributed HFCT secondary winding configurations are analyzed to evaluate their impact on signal behavior and sensitivity. The experimental results are compared with a simplified theoretical model to validate performance trends and identify key design factors. The HFCT response to IEC 60270-compliant calibrator impulses is examined to assess its suitability for PD measurement systems and monitoring. The results highlight the critical role of core selection and the number of turns in shaping HFCT bandwidth, attenuation, and impulse response, which are essential for accurate and reliable PD detection in continuous monitoring systems to perform the diagnostic of the electrical insulation condition. This diagnostic approach is based on the detection of partial discharge (PD) activity over time, with the objective of identifying evolving phenomena by monitoring the amplitude and characteristics of the signals associated with different defects. Therefore, accurate separation of signals originating from different defects and from noise is essential. These results provide a foundation for designing HFCT sensors suitable for integration into advanced diagnostic frameworks, AI-aided for Condition-Based Maintenance (CBM).
Giovanna et al. (Wed,) studied this question.