Answers are grounded in this paper and cite their sources.
In the context of obtaining an excellent elongation and tensile-strength combination in the third generation of advanced high strength steel, we emphasized the practical significance of adjusting the retained austenite fraction and stability in medium-Mn steel to obtain better mechanical properties. A novel cyclic quenching and austenite reverse transformation (CQ-ART) was used to obtain a large retained austenite content in Fe-0.25C-3.98Mn-1.22Al-0.20Si-0.19Mo-0.03Nb (wt.%) Nb–Mo micro-alloyed medium-Mn steel. The results show that after twice cyclic quenching and ART, the alloy exhibited optimum comprehensive properties, characterized by an ultimate tensile strength of 838 MPa, a total elongation of 90.8%, a product of strength and elongation of 76.1 GPa%, and the volume fraction of austenite of approximately 62 vol.%. The stability of retained austenite was significantly improved with the increasing of the number of cyclic quenching. Moreover, the effects of CQ-ART on the microstructure evolution, mechanical properties, C/Mn partitioning behavior, and austenite stability were investigated. Further, the strengthening effect of microalloying elements Nb–Mo was also discussed.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2019) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: