Multifunctional Chemical Linker Imidazoleacetic Acid Hydrochloride for 21% Efficient and Stable Planar Perovskite Solar Cells

Chemical interaction at a heterojunction interface induced by an appropriate chemical linker is of crucial importance for high efficiency, hysteresis-less, and stable perovskite solar cells (PSCs). Effective interface engineering in PSCs is reported via a multifunctional chemical linker of 4-imidazoleacetic acid hydrochloride (ImAcHCl) that can provide a chemical bridge between SnO₂ and perovskite through an ester bond with SnO₂ via esterification reaction and an electrostatic interaction with perovskite via imidazolium cation in ImAcHCl and iodide anion in perovskite. In addition, the chloride anion in ImAcHCl plays a role in the improvement of crystallinity of perovskite film crystallinity. The introduction of ImAcHCl onto SnO₂ realigns the positions of the conduction and valence bands upwards, reduces nonradiative recombination, and improves carrier life time. As a consequence, average power conversion efficiency (PCE) is increased from 18.60% ± 0.50% to 20.22% ± 0.34% before and after surface modification, respectively, which mainly results from an enhanced voltage from 1.084 ± 0.012 V to 1.143 ± 0.009 V. The best PCE of 21% is achieved by 0.1 mg mL⁻¹ ImAcHCl treatment, along with negligible hysteresis. Moreover, an unencapsulated device with ImAcHCl-modified SnO₂ shows much better thermal and moisture stability than unmodified SnO₂ .