Key points are not available for this paper at this time.
Abstract Patient specific plastic cast for broken limbs has been developed recently in pharmaceutical field through three-dimensional (3D) printing method. However, the production of a 3D printed cast through normal 3D printing method is time consuming compared to conventional plaster casting. In this study, a design of ventilated structured thermoformable 3D-printed polylactic acid (PLA) cast was produced as an alternative for the 3D printed cast production method. This design was initially printed in a flat shape and then transformed into a cast which can be fitted to the user’s arm by using heat and external force. Finite Element Analysis (FEA) method was used to assess the mechanical properties of the proposed cast. In this analysis, thethermoformable design was exerted with a distributed force of 400 N, which is larger than the loading conditions encountered by human in their daily life. The mechanical properties of the thermoformable PLA cast such as local displacement under a specific load, maximum load, and stress were evaluated. Results were compared with the mechanical properties of Plaster of Paris cast. The results obtained from the FEA indicates that at the same layer thickness, the thermoformable 3D-printed PLA cast is stronger than the Plaster of Paris cast.
Sorimpuk et al. (2022) studied this question.