Swept-Leading-Edge Pylon Effects on a Scramjet Pylon-Cavity Flameholder Flowfield

This study explores the effect of adding a pylon to the leading edge of a cavity flameholder in a scramjet combustor. Data were obtained through a combination of wind-tunnel experimentation and steady-state computational fluid dynamics. Wind-tunnel data were collected using surface pressure taps, static and total probe data, shadowgraph flow visualization, and particle image velocimetry. Computational fluid dynamics models were solved using the commercial FLUENT software. The addition of an intrusive device to the otherwise low-drag cavity flamebolder offers a potential means of improving combustor performance by enabling combustion products to propagate into the main combustor flow via the low-pressure region behind the pylon. This study characterized the flowfield effects of adding the pylon as well as the effect of changing Reynolds numbers over the range of approximately 33 x 10 6 to 55 × 10 6 m ―1 at a Mach number of 2. The addition of the pylon resulted in approximately 3 times the mass flow passing through the cavity compared with the cavity with no pylon installed. Reynolds number effects were weak. The addition of the pylon led to the cavity fluid traveling up to the top of the pylon wake and significantly increasing the exposure and exchange of cavity fluid with the main combustor flow.