In this paper, a novel high-shielding-effectiveness energy-selective surface (HSE–ESS) is proposed. In previous solutions regarding energy-selective surfaces (ESSs) presented in the literature, PIN diodes are usually employed as nonlinear transmission components; however, these diodes may be burnt by powerful high-power microwave (HPM) beams, causing ESSs to lose their shielding effectiveness (SE). To date, no studies have focused on maintaining the SE performance of ESSs after PIN diode failure. To address these limitations, we introduce shape memory alloys (SMAs) into ESS design. The consequences of PIN diode failure are offset by the physical deformation of SMA components caused by high-amplitude-current heating. This characteristic, featuring 30 dB SE, can be defined as high shielding effectiveness (HSE). After completing the design and performing accurate numerical simulations, we fabricated a prototype using PCB technology and characterized it in an anechoic environment, verifying the overall method. In particular, the SMA components proved to be an effective medium for guaranteeing electrical continuity under thermal stress conditions, thus paving the way for their extended adoption in ESSs by substituting or acting as a back-up for PIN diodes. Overall, this approach enhances the reliability and SE of ESSs by adding SMA components.
Li et al. (Tue,) studied this question.