Evaluation of biomass-based production of below zero emission reducing gas for the iron and steel industry

The present paper focuses on the production of a below zero emission reducing gas for use in raw iron production. The biomass-based concept of sorption-enhanced reforming combined with oxyfuel combustion constitutes an additional opportunity for selective separation of CO 2 . First experimental results from the test plant at TU Wien (100 kW) have been implemented. Based on these results, it could be demonstrated that the biomass-based product gas fulfills all requirements for the use in direct reduction plants and a concept for the commercial-scale use was developed. Additionally, the profitability of the below zero emission reducing gas concept within a techno-economic assessment is investigated. The results of the techno-economic assessment show that the production of biomass-based reducing gas can compete with the conventional natural gas route, if the required oxygen is delivered by an existing air separation unit and the utilization of the separated CO 2 is possible. The production costs of the biomass-based reducing gas are in the range of natural gas-based reducing gas and twice as high as the production of fossil coke in a coke oven plant. The CO 2 footprint of a direct reduction plant fed with biomass-based reducing gas is more than 80% lower compared with the conventional blast furnace route and could be even more if carbon capture and utilization is applied. Therefore, the biomass-based production of reducing gas could definitely make a reasonable contribution to a reduction of fossil CO 2 emissions within the iron and steel sector in Austria.