Solidification Performance and Mechanism of TSC Composite Soil Based on Microbially Induced Mineralization

To enhance the engineering performance of fine-grained composite soils with unbalanced particle gradation, high plasticity, and poor water stability, a synergistic stabilization strategy combining particle structure regulation and microbially induced calcium carbonate precipitation (MICP) was proposed. The particle size distribution and fundamental engineering properties of a titanium gypsum–clay (TSC) composite soil were first optimized through systematic single-factor blending tests. The results indicate that a TS:C ratio of 60:40 significantly improved gradation characteristics, reduced plasticity, and enhanced both compaction behavior and load-bearing capacity. Based on the optimized gradation framework, MICP treatment was subsequently introduced to further enhance water stability. The effects of key parameters, particularly the type of calcium source, on the evolution of water stability were systematically investigated. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to elucidate the underlying reinforcement mechanisms. The results demonstrate that the water stability coefficient increased markedly from 0.35 to 0.83 following MICP treatment, while strength degradation under water immersion was effectively mitigated. Microscopic observations reveal that microbially precipitated calcite fills pore spaces and forms a continuous cementation network via particle bridging and interfacial bonding, leading to an approximately 32% reduction in porosity. Overall, the proposed synergistic strategy offers an effective and sustainable approach for improving the water stability and structural integrity of complex fine-grained composite soils.