PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
May 6, 2026Materials0 citationsOpen Access

Influence of Particle Size Distribution on Rheology Behavior of Slurry and Flow Characteristics of Long-Distance Transportation

View Full Paper
XCXin ChenZJZhongtao JiangJZJunhui Zhang

Key Points

  • To explore how particle size distribution affects the rheology and flow characteristics of backfill slurry in long-distance transportation.
  • Conducted rheological experiments to obtain parameters of slurry under varying particle size distribution.
  • Utilized CFD numerical simulations to analyze flow characteristics during long-distance transportation.
  • A reduction in mixed aggregate particle size significantly increases both yield stress and plastic viscosity of backfill slurry.
  • Slurry transportation resistance positively correlates with conveying distance.
  • The slurry demonstrates plug flow behavior in horizontal and vertical sections, not in bends.

Abstract

The particle size distribution of backfill aggregate is a key factor affecting the performance of the -long-distance pipeline transport of backfill slurry. However, the understanding of its impact on slurry flow behavior, transportation resistance, and particle distribution mechanisms remains incomplete and calls for further investigation. This study first obtained the rheological parameters of slurry and their variation laws under the influence of particle size distribution through rheological experiments. Subsequently, CFD numerical simulations are used to investigate the flow characteristics of slurry under long-distance transportation conditions. The findings demonstrate that a reduction in the mixed aggregate particle size leads to a significant increase in both the yield stress and plastic viscosity of the backfill slurry. The conveying distance shows a positive correlation with the slurry transportation resistance. Furthermore, the slurry exhibits plug flow behavior in both the horizontal and vertical pipe sections, whereas this plug flow pattern is no longer observed in the bend section. The tailings particles exhibit a distinct stratified distribution within the pipeline. In the horizontal pipe section, the graded tailings predominantly settle at the bottom, whereas the fine tailings remain suspended near the top. In contrast, in the vertical pipe section, the graded tailings tend to accumulate in the central zone of the pipe, while the fine tailings are dispersed along the pipe wall. As the content of graded tailings increases from 30% to 50%, both the zones with increased and decreased particle volume fractions expand, while the steady flow zone correspondingly shrinks. Meanwhile, the volume fraction of graded tailings at the bottom of the pipe rises significantly from 0.12 to 0.61. This research provides important theoretical support for the optimized matching and rational application of tailings particle size distribution in the design of long-distance pipeline transportation systems for mine backfill.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Chen et al. (2026) studied this question.

synapsesocial.com/papers/69fa986a04f884e66b532191https://doi.org/10.3390/ma19091881
Ask AI
Helpful
Bookmark
Share
View Full Paper