In sediment-laden irrigation channels, sediment deposition upstream of hydraulic measuring structures can degrade hydraulic performance, reduce measurement reliability, and increase maintenance demand. To clarify the effects of structural optimization on sediment transport and siltation resistance, physical model experiments were conducted on an airfoil weir-orifice facility under different discharges, structural angles, and sediment concentrations. The analysis focused on sediment deposition patterns, longitudinal water surface profiles, sediment concentration, suspended sediment transport rate, cross-sectional velocity distribution, vertical velocity gradient, and Froude number. The results showed that the optimized configuration produced a flatter and more uniform upstream bed morphology, and the average deposition thickness decreased from 4.83 cm to 4.31 cm, corresponding to a reduction of 10.58%. Under all tested conditions, the optimized configuration reduced upstream backwater, increased local flow velocity, and shifted the hydraulic jump closer to the facility outlet. Sediment concentration and suspended sediment transport rate were consistently higher after optimization, indicating enhanced sediment carrying capacity. In addition, the optimized configuration increased the vertical velocity gradient and Froude number, while all cases remained within the subcritical-flow regime. These findings demonstrate that structural optimization can simultaneously improve hydraulic regulation and siltation resistance, and provide an experimental basis for the application of streamlined hydraulic measuring structures in sediment-laden irrigation channels.
Liu et al. (2026) studied this question.