Key points are not available for this paper at this time.
The efficiency of the partitioning of trivalent actinides from a PUREX raffinate is demonstrated with a TODGA+TBP extractant mixture dissolved in an industrial aliphatic solvent TPH. Based on the results of cold and hot batch extraction studies and with the aid of computer code calculations, a continuous counter-current process is developed and two flowsheets are tested using miniature centrifugal contactors. The feed solution used is a synthetic PUREX raffinate, spiked with 241Am, 244Cm, 252Cf, 152Eu, and 134Cs. More than 99.9% of the trivalent actinides and lanthanides are extracted and back-extracted and very high decontamination factors are obtained for most fission products. The co-extraction of zirconium, molybdenum, and palladium is prevented using oxalic acid and HEDTA. However, 10% of ruthenium is extracted and only 3% is back-extracted using diluted nitric acid. The experimental steady-state concentration profiles of important solutes are determined and compared with model calculations and good agreement is generally obtained.
Modolo et al. (Tue,) studied this question.