Experimental study of step-displacement hydraulic fracturing on naturally fractured shale outcrops

Low porosity and permeability make it extremely difficult to develop shale oil and gas reservoirs. The stimulated reservoir volume is believed to have potential to obtain industry production by multi-stage or simultaneous fracturing in horizontal wells. The formation mechanism of network hydraulic fractures in fractured shale reservoirs remains poorly understood. In this article, a true tri-axial hydraulic fracturing system associated acoustic emission monitor was deployed to simulate hydraulic fracturing on shale outcrops. Results showed that the properties of natural fractures (such as aperture, orientation), compared to the viscosity and displacement of the fracturing fluid, affect the propagation direction of hydraulic fractures more predominantly. Each natural fracture in a natural fracture network can independently affect the hydraulic fracture. Low displacement (below the diffusion ability of a reservoir) fracturing tends to connect pre-existing fractures, while high displacement (surpass the diffusion ability of a reservoir) tends to create new fractures. After the breakdown pressure, an increase in injection rate results in more acoustic emission energy and induces new fractures. These results suggest that step-displacement fracturing technology is a possible mechanism to obtain effective fracture networks. Such an understanding would help to avoid unproductive, or sometimes destructive, costly segments of the hydraulic fracturing treatment design.