Key points are not available for this paper at this time.
For liquid hydrogen (LH2) to become an energy carrier in energy commodity markets at scales comparable to for instance LNG, liquefier capacities must be scaled up several orders of magnitude. While state-of-the-art liquefiers can provide specific power requirements down to 10 kWh/kg, a long-term target for scaled-up liquefier trains is 6 kWh/kg. High capacity will shift the cost weighting more towards operational expenditures, which motivates for measures to improve the efficiency. Detailed exergy analysis is the best means for gaining a clear understanding of all losses occurring in the liquefaction process. This work analyses in detail a hydrogen liquefier that is likely to be realisable without intermediate demonstration phases, and all irreversibilities are decomposed to the component level. The overall aim is to identify the most promising routes for improving the process. The overall power requirement is found to be 7.09 kWh/kg, with stand-alone exergy efficiencies of the mixed-refrigerant pre-cooling cycle and the cryogenic hydrogen Claude cycle of 42.5% and 38.4%, respectively. About 90% of the irreversibilities are attributed to the Claude cycle while the remainder is caused by pre-cooling to 114 K. For a component group subdivision, the main contributions to irreversibilities are hydrogen compression and intercooling (39%), cryogenic heat exchangers (21%), hydrogen turbine brakes (15%) and hydrogen turbines (13%). Efficiency improvement measures become increasingly attractive with scale in general, and several options exist. An effective modification is to recover shaft power from the cryogenic turbines. 80% shaft-to-shaft power recovery will reduce the power requirement to 6.57 kWh/kg. Another potent modification is to replace the single mixed refrigerant pre-cooling cycle with a more advanced mixed-refrigerant cascade cycle. For substantial scaling-up in the long term, promising solutions can be cryogenic refrigeration cycles with refrigerant mixtures of helium/neon/hydrogen, enabling the use of efficient and well scalable centrifugal compressors.
Berstad et al. (Thu,) studied this question.