A Review on the Overall Performance of Metal Hydride-Based Hydrogen Storage Systems

Metal hydride-based hydrogen storage (MHHS) has been used for several purposes, including mobile and stationary applications. In general, the overall MHHS performance for both applications depends on three main factors, which are the appropriate selection of metal hydride material uses, design configurations of the MHHS based on the heat exchanger, and overall operating conditions. However, there are different specific requirements for the two applications. The weight of the overall MHHS is the key requirement for mobile applications, while hydrogen storage capacity is the key requirement for stationary applications. Based on these requirements, several techniques have been recently used to enhance MHHS performance by mostly considering the faster hydrogen absorption/desorption reaction. Considering metal hydride (MH) materials, their low thermal conductivity significantly impacts the hydrogen absorption/desorption reaction. For this purpose, a comprehensive understanding of these three main factors and the hydrogen absorption/desorption reaction is critical and it should be up to date to obtain the suitable MHHS performance for all related applications. Therefore, this article reviews the key techniques, which have recently been applied for the enhancement of MHHS performance. In the review, it is demonstrated that the design and layout of the heat exchanger greatly affect the performance of the internal heat exchanger. The initial temperature of the heat transfer fluid and hydrogen supply pressure are the main parameters to increase the hydrogen sorption rate and specific heating power. The higher supply pressure results in the improvement in specific heating power. For the metal hydride material selection under the consideration of mobile applications and stationary applications, it is important to strike trade-offs between hydrogen storage capacity, weight, material cost, and effective thermal conductivity.