PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 1, 2006Journal of the American Oil Chemists Society235 citations

Chemical modification of vegetable oils for lubricant applications

View Full Paper
BSBrajendra K. SharmaAAAtanu AdhvaryuZLZengshe Liu

Key Points

Key points are not available for this paper at this time.

Abstract

Abstract Owing to the unfavorable impact on the environment of mineral oil‐based lubricants, there has been a steady increase in the demand for biodegradable, environment‐friendly lubricants. However, development of a biodegradable base fluid that could replace or partially substitute conventional mineral oil is a big challenge. Vegetable oils are recognized as rapidly biodegradable and are thus promising candidates as base fluids in environment‐friendly lubricants. Vegetble oils have excellent lubricity, but poor oxidation and low‐temeprature stability. This paper presents a series of structural modifications of vegetable oils using anhydrides of different chain lengths. The reaction was monitored and products were confirmed by NMR, FTIR, gel permeation chromatography, and thermogravimetric analysis (TGA). Experimental conditions were optimized for research quantity and for laboratory scale‐up (up to 4 lb=1.8 kg). The thermo‐oxidation stability of these new lubricant base fluids was tested using pressure differential scanning calorimetry and TGA. The chemically modified base fluids exhibit superior oxidation stability in comparison with unmodified vegetable oils. These base fluids in combination with suitable additives exhibit equivalent oxidation stability compared with mineral oil‐based formulations.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Sharma et al. (2006) studied this question.

synapsesocial.com/papers/6a086131113ba5b476de1f16https://doi.org/10.1007/s11746-006-1185-z
Ask AI
Helpful
Bookmark
Share
View Full Paper