Analysis and design of an isolated high step‐up converter based on the secondary side quasi‐resonant loops

In a high step‐up converter, the primary side input current contributes a significant share of total power loss. Meanwhile, high‐voltage stresses of secondary side components are also big issues. This study proposes an isolated converter with secondary side quasi‐resonant loops. The push–pull structure is adopted to reduce active switch numbers so the primary side power loss can be controlled in a very minor range. The newly added resonant loops on the secondary side significantly decrease the current stresses of the resonant capacitors, so the power loss caused by capacitor equivalent‐series‐resistance is reduced. The voltage stresses of diodes and capacitors on the secondary side are also decreased by an improved symmetrical‐voltage‐quadrupler‐rectifier structure. The proposed converter is with the maximum voltage gain equal to 4 without consideration of the transformer. Therefore, it is helpful to decrease the transformer turns ratio. The operation process is analysed in detail and the design considerations are also summarised. Theoretical analysis is verified by the experimental results of a 400 W prototype with 34–40 V input and 380 V output.