Application of polyacrylonitrile-derived carbon fiber (CF) as a thermal insulation material is restricted by inherently high thermal conductivity. Encapsulation of poly(p-phenylene benzobisoxazole) (PBO) on CF was supposed to improve the mechanical and heat resistance of CF, which would be desired to improve mechanical and thermal-insulating performances. In this work, PBO molecules were uniformly coated onto the surface of air plasma-treated CF. Carbonized PBO-encapsulated CF (CF@CPBO) was prepared via thermal treatment at 600–1400 °C. At higher carbonization temperatures, CF@CPBO exhibited a cleaner surface, more radial graphite layers within fibers, enhanced crystallinity of carbon layers (amorphous to 0.337 nm of interplanar spacing), reduced defective/graphitic content (0.959–0.909 of ID/IG), decline in surface O content (20.1–9.6 at.%) and improved symmetry of the C-C deconvoluted peak. After weaving them into a net and compression molding, CF@CPBO felts with a random distributed structure (no voids and no fiber bundles) presented improved compression strength (10.5–25.6% of enhancement than unmodified CF) and excellent compression-recovery performance (130.9–110.8 MPa) through 10 cycles. Thermal conductivity values of CF@CPBO felts at 30–1800 °C were 0.13–1.42 W/m/K, which were 42.2–62.6% of unmodified CF. This work proposes an efficient strategy for regulating the high-performance organic fiber structure through heat treatment-induced processes.
Zhang et al. (Sat,) studied this question.