Distributed sensing with nanoparticle-doped fibers in standard OTDR systems: Validation and performance analysis

This paper presents the implementation of enhanced backscattering optical fibers in optical time-domain reflec tometry (OTDR). The increase in the backscattering is achieved by doping the fiber core with nanoparticles, resulting in the so-called nanoparticle-doped optical fibers (NPFs). The so-called NPF-OTDR sensor system takes advantage of the higher scattering of the NPFs to increase the spatial resolution and strain sensitivity of the distributed sensor system. The wavelength-dependent optical attenuation is measured over a wide range of wave lengths using the cutback method to evaluate the operational wavelength for the OTDR. In this case, the results indicated smaller attenuation in 1310 nm than at the other operational wavelengths of the OTDR system (i.e., 1550 nm and 1625 nm). For this reason, the OTDR is applied at the 1310 nm wavelength for different strains applied along the optical fiber (with 1 m separation between them). The results for strain estimation showed relative errors of around 3%, whereas the strain position estimation is around 0.24 m. These results indicate the feasibility of the proposed system with a potential spatial resolution of around 0.5 m (which can be even lower depending on the OTDR setup). Thus, the advantages of the OTDR using the NPF result in a better sensor system performance when compared with the standard optical fibers, significantly enhancing the conventional OTDR capabilities in terms of resolution with even comparable performance to specialty OTDR systems at a lower cost and with a simpler design.