This paper presents an active cross-connected modular multilevel converter (AC-MMC) based on series-connected half-bridge modules. It is intended for completely enhancing the performance of a medium-voltage motor drive system in the full speed range from standstill to rated speed under all load conditions. The proposed AC-MMC circuit is characterized by the cross connection of upper and lower arm middle taps through a branch of series-connected half-bridge converters, which have an identical voltage and current rating with the submodules in the upper and lower arms. This cross-connected branch provides a physical power transfer channel for the upper and lower arms. By properly controlling the amount of high-frequency current flowing through the cross-connected branch, the power balance between the upper and lower arms is achieved even at a zero/low motor speed under constant torque condition. Meanwhile, no common-mode voltage is introduced in the whole speed range. A control strategy with focus on submodule capacitor voltage control is also proposed in this paper to guarantee the normal converter operation. Simulation results obtained from a 4160-V, 1-MW model verify the feasibility of the proposal. Experiments on a downscaled prototype also confirm the validity of the novel circuit and the associated control strategy.
No takes yet. Share an insight, caveat, or question.
Du et al. (2016) studied this question.