Evaluation of energy absorption capabilities and mechanical properties in FDM printed PLA TPMS structures

Additive manufacturing is an advanced technology used to fabricate complex geometries with unique properties like cellular structures which accommodate repeated unit cells located in the x, y and z direction. These structures can be used as infill patterns due to their self-supporting structure. Among the cellular structures, Triply Periodic Minimal Surface (TPMS) structures such as Gyroid, Diamond and Schwarz Primitive (SchwarzP) structures can be tailored to produce complex structures for various applications like tissue engineering scaffolds and replace the conventional polymeric foams. TPMS structures are designed and manufactured by using the Fused Deposition Modelling (FDM) technique using Poly-Lactic Acid (PLA) as material. Among TPMS structures, Gyroid is having a unique property like structurally symmetric which design was modified to enhance the mechanical properties. The modified Gyroid or deformed Gyroid undergone a quasi-static compression test and compare the results with Diamond and SchwarzP structures. Porosity and permeability coefficients are evaluated and an optical microscope is used to verify the fabricated components. As well as, Failure patterns of the structures were evaluated and energy absorption capabilities determined. The main objective of this paper is to evaluate the impact of design and porosity on the mechanical and morphological properties of TPMS structures. In conclusion, the deformed Gyroid has more energy absorption capability up to the 11.6% strain than other TPMS structures. After 11.6% of strain, SchwarzP structure dominates.