PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
October 1, 1982Journal of the American Ceramic Society166 citations

Microstructural Analysis of Sintered High‐Conductivity Zirconia with Al 2 0 3 Additions

View Full Paper
EBE. ButlerJDJohn Drennan

Key Points

Key points are not available for this paper at this time.

Abstract

Transmission electron microscopy (at 100 and 1000 kV potential) and analytical scanning transmission electron microscopy were used to study α‐Al 2 0 3 second‐phase particles and their interactions with grain boundaries in two high‐conductivity Y 2 0 3 /Yb 2 0 3 stabilized zirconia ceramics containing deliberate additions of the alumina as a sintering aid. Most of the Al 2 0 3 particles were intragranular and microanalysis showed that they contained inclusions rich in Zr or Si plus Zr. Al 2 O 3 particles at grain boundaries were frequently associated with amorphous cusp areas rich in Si and Al. The results suggest that the Al 2 0 3 acts as a scavenger for SiO 2 , removing it from grain‐boundary localities. A model is proposed whereby this process occurs as the boundaries meet the second‐phase particles, assisted by rapid grain‐boundary diffusion. Such an ZrO 2 ‐Al 2 O 3 ‐SiO 2 interaction and partitioning is predicted thermodynamically and offers a possible explanation for the improvements in ionic conductivity brought about by Al 2 O 3 additions, as reported in the literature.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Butler et al. (1982) studied this question.

synapsesocial.com/papers/6a2076c621cb8130ca7803b6https://doi.org/10.1111/j.1151-2916.1982.tb10336.x
Ask AI
Helpful
Bookmark
Share
View Full Paper