Experimental investigation of flow about a strut-endwall configuration

An experimental study was conducted to investigate incompressible flow about a strut-endwall configuration positioned within a constant area duct. The endwal boundary layer was tripped, but natural transition occurred on the strut surface. The results indicate that spanwise varying transition on this surface leads to the formation of a secondary vortex which coexists with the horseshoe vortex generated by endwall flow separation upstream of the strut leading edge. Both vortices are similar in strength downstream of the strut trailing edge, and both distort the primary flow and local turbulence structure in the wake-endwall region. The level of distortion is demonstrated by means of axial mean velocity contours, turbulence kinetic energy contours, and Reynolds shear stress contours measured in the cross plane at two streamwise locations. Analysis of the results shows that conventional eddy viscosity and k-epsilon transport equation models are not wholly adequate for predicting this flow situation.