A skin friction meter, using the viscosity balance principle, suitable for use with flat or curved metal surfaces (based on thickness measurement)

An oil film is placed on a surface over which gas is flowing, and moves under the influence of skin friction. The skin friction meter to be described makes use of the fact that, at time t after the start of the flow with skin friction tau , the thickness y of oil of viscosity mu at a point x close downstream of the leading edge is y= mu x/ tau t. A laser beam focused at position x, reflects partly from the oil surface and partly from the metal substrate. The reflected beams are focused on a photocell and the pen recorder output gives an interferometric record of y against t. To permit accurate setting of the position x, a second laser beam is used which is set at the upstream oil edge, x=0. The results obtained show good agreement with theory, repeatability and consistency. The meter can be used with any polished metal surface, whether flat or curved, and provides versatile and potentially accurate method for skin friction measurement.