Key points are not available for this paper at this time.
Significant reductions in expensive platinum catalyst loading for the oxygen reduction reaction are needed for commercially viable fuel cell electric vehicles as well as other important applications. In reducing loading, a resistance at the Pt surface in the presence of thin perfluorosulfonic acid (PFSA) electrolyte film, on the order of 10 nm thick, becomes a significant barrier to adequate performance. However, the resistance mechanism is unresolved and could be due to gas dissolution kinetics, increased diffusion resistance in thin films, or electrolyte anion interactions. A common hypothesis for the origin of the resistance is a highly reduced oxygen permeability in the thin polymer electrolyte films that coat the catalyst relative to bulk permeability that is caused by nanoscale confinement effects. Unfortunately, the prior work has not separated the thin-film gas transport resistance from that associated with PFSA interactions with a polarized catalyst surface. Here, we present the first characterization of the thin-film O2 transport resistance in the absence of a polarized catalyst, using a nanoporous substrate that geometrically mimics the active catalyst particles. Through a parametric study of varying PFSA film thickness, as thin as 50 nm, we observe no enhanced gas transport resistance in thin films as a result of either interfacial effects or structural changes in the PFSA. Our results suggest that other effects, such as anion poisoning at the Pt catalyst, could be the source of the additional resistance observed at low Pt loading.
Liu et al. (Mon,) studied this question.