Phase-Locked Loop Independent Second-Order Generalized Integrator for Single-Phase Grid Synchronization

Second-order generalized integrator (SOGI) requires fast and accurate grid voltage frequency information for quadrature signal generation (QSG) in single-phase systems. Conventionally, synchronous reference frame phase-locked loop (PLL) (SRFPLL) is used in a cascade manner and provides frequency feedback to SOGI. PLL is a non-linear closed-loop control system that requires adequate gain parameter design trade-off to provide accurate grid synchronization. Additionally, it creates interdependent loops while estimating the grid frequency and phase-angle. This results in unwanted frequency disturbances during grid transients, such as voltage sag and phase-angle jumps (PAJs) which are fed back to the SOGI as well. Thus, this article proposes two PLL independent frequency-feeding approaches for SOGI: Type-A and -B. The frequency is estimated using the normalized single-phase grid voltage signal in both types. In Type-A, the normalization is done using cascaded recursive discrete-Fourier transform (RDFT) and inverse RDFT (IRDFT). On the other hand, in Type-B, SOGI outputs are used for normalization. The grid voltage amplitude is estimated using the absolute value of the in-phase and in-quadrature components of the proposed frequency-adaptive SOGI. Furthermore, the third-order polynomial approximation of the arctangent function is implemented for phase-angle estimation in both types. The performance of both the types during transients and steady-state grid voltage disturbances (dc offset and harmonics) are compared with SOGIPLL using both simulations and experiments.