Key points are not available for this paper at this time.
Abstract Optical fibres, owing to their ultra-low transmission loss, underpin global telecommunications. However, this remarkable low-loss performance has not been extended to integrated photonic devices, which are increasingly critical for data-intensive communications in the era of artificial intelligence (AI). Here, we translate the widely adopted mass-production process for fibre manufacturing—flame hydrolysis—to wafer-scale integrated photonics, and demonstrate ultrahigh- Q integrated microresonators. By leveraging high GeO 2 doping, the deposited germano-silicate (Ge:silica) films achieve full densification at moderate thermal budgets, while also allowing for a post-processing furnace-reflow technique that has the capability to both repair any etch-induced defects and enhance optical Q , leading to a high degree of process tolerance. When combined with deep-UV lithography, these films form microresonators exhibiting ultrahigh Q factors of up to 566 million at 1064 nm, corresponding to a waveguide propagation loss as low as 0.07 dB m −1 . Like their fibre counterparts, these devices exhibit a broad transmission window with Q factors surpassing 100 million demonstrated from the telecommunications band to the violet spectrum. Moreover, the width dependence of Q factor and a two-order-of-magnitude Q recovery enabled by the furnace reflow process are also demonstrated. This work extends high-quality, high-rate flame hydrolysis deposition (FHD) from optical fibre manufacturing to integrated photonics, establishing a scalable route towards fibre-level loss in photonic integrated circuits.
Chen et al. (Thu,) studied this question.