CFD study on the impact of yawed inflow on loads, power and near wake of a generic wind turbine

This article deals with the influence of yawed inflow conditions on the performance of a single generic 2.4MW wind turbine. It presents the results of studies performed at the Institute of Aerodynamics and Gas Dynamics by means of computational fluid dynamics , using a fully meshed wind turbine with all boundary layers being resolved. The block‐structured flow solver FLOWer is used; a dual‐time stepping method for temporal discretization and a second‐order Jameson–Schmidt–Turkel method for the calculation of the convective fluxes are applied. All simulations are carried out using a detached eddy simulation approach. In detail, two different wind speeds and a yaw angle range between −50 ° and +50 ° are evaluated in the paper. Based on these data, it is shown that the reduction of power output follows a cosine to the power of X function of the yaw angle. Furthermore, the growing azimuthal non‐uniformity of the load distributions with increasing yaw angle magnitude is analysed by spanwise load distributions. As a central influence on the load distributions, the advancing and retreating blade effect is identified. Moreover, the deflection of the wake as a result of the inflow is investigated, and the deflection angles are compared with a modelling approach. A connection line between wake deflection and load asymmetry is drawn. The results are of particular importance for wind park situations with downstream turbines facing the distorted inflow created from upstream ones.