PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 1, 1947Journal of research of the National Bureau of Standards20 citationsOpen Access

Properties of barium-strontium titanate dielectrics

EBE.N. BuntingNational Institute of Standards and TechnologyGSG. R. SheltonNational Institute of Standards and TechnologyACA. S. CreamerNational Institute of Standards and Technology

Key Points

Key points are not available for this paper at this time.

Abstract

The results on barium-strontium titanates are given for heat treatments, absorption, shrinkage, therm al expansion, dielectric constant (K) at -60 0 to 85 0 C, and also for Q, the recip rocal 01 the power factor, at 25 0 C for frequencies of 50 to 20,000 kc/s. A few measurements of K and Q were made at 3,000 me/s. Specimens matured (absorption less t han 0 .1 percent) at 1,250 0 to 1,430 0 C. K values ranged from 34, for BaO:4Ti02, to several thousand for specimens with compos itions on the BaTi03-SrTiOa join. Specimens having the composition BaO:5Ti02 were unique in that their temperat ure coefficient of K was practically zero. Q values ranged from 50 to 100 for test pieces containing over 40 percent of BaO , and from 400 to 10,000 for those with less than 40 percent of BaO. K values did not change appreciably with frequency. Linear thermal expansions between 25 0 and 700 0 C ranged from 0.6 to 0.84 percent. Many of these specimens could be used in radio equipment .

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Bunting et al. (1947) studied this question.

synapsesocial.com/papers/6a226ddbf6fb2c59e553d4d3https://doi.org/10.6028/jres.038.017
Ask AI
Helpful
Bookmark
Share
View Full Paper