Key points are not available for this paper at this time.
Marine science and Internet of Underwater Things applications rely significantly on collecting data from underwater sensors. Data collection using long-distance underwater acoustic communications consumes a lot of energy in underwater sensor nodes, which are powered by batteries. To achieve low-energy consumption, we can use the autonomous underwater vehicle (AUV) to move close to sensor nodes and exploit the short-range and high-rate communications. Most of the existing AUV-based data collection schemes consider the scenarios having the knowledge of node positions, where the cruising trajectory can be computed before the AUV’s departure. These schemes cannot apply to some scenarios such as turtle tracking for a certain sea area having no position information. To this end, we first propose a planning-while-detecting approach to dynamically detect the sensors on turtles and adjust the AUV cruising direction to collect data. To further improve data efficiency under the energy limit of the AUV, we group the sensors that can share the same trajectory using their detected directions. A grouping-based dynamic trajectory planning (GDTP) is then proposed to determine the next cruising direction that can visit the group of sensors having the largest amount of data and demanding the least cruising energy at the risk of detection errors. Simulation results show that GDTP achieves significantly higher data collection efficiency than the existing trajectory planning algorithms in dynamic scenarios, and as the communication range increases, it can even outperform the existing algorithms with node locations.
Cheng et al. (Mon,) studied this question.