⌘+K

Pulse Explore Communities Researchers Journals

Home Communities Explore

February 28, 2019Journal of Materials Science and Engineering BOpen Access

Viscoelastic Properties and Creep-Fatigue Behavior of PA2200/HA Composites Manufactured by Selective Laser Sintering

Frederic Dabbas Steferson Luiz Stares Henrique Schappo Dachamir Hotza Gean Vitor Salmoria

View Full Paper

Ask AI

Bookmark

Share

Abstract

Porous (polyamide/hydroxyapatite) composites were manufactured via SLS (selective laser sintering) process. Specimens with different PA2200/HA contents (100/0; 95/5; 90/10 and 80/20) were sintered at relative low laser energy density. The porous composite specimens were characterized for dynamic-mechanical analysis. The dynamic-mechanical properties changed as a function of the composition of the composite materials. Storage and loss modulus vary from 1,050 to 215 MPa and 35 to 5 MPa, respectively.

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Dabbas et al. (2019) studied this question.

synapsesocial.com/papers/6a25a663cd351018c0960b8d https://doi.org/10.17265/2161-6221/2019.1-2.004

View Full Paper

Ask AI

Bookmark

Share

Keep reading

Synapse has enriched 5 related papers. Consider them for comparative context:

1The Vibrational Behavior of the Mixture Quercetin/Gelucire 50/13 at Room and Body TemperatureJournal of Materials Science and Engineering B · Tue,
2Effect of Universal Primers on the Tensile Bond Strength between Zirconia and Resin CompositesJournal of Materials Science and Engineering B · Thu,
3A Systematic Classification and Labelling Approach to Support a Circular Economy Ecosystem for NdFeB-Type MagnetJournal of Materials Science and Engineering B · Fri,
4Effect of Texture and Surface Chemistry of Palm Nut Hull Activated Carbon on the Adsorption of Pigments and Free Fatty Acids from Vegetable OilsJournal of Materials Science and Engineering B · Fri,
5Single Wall Carbon Nanotubes—Health, Safety and Environmental StatusJournal of Materials Science and Engineering B · Sun,

More from Journal of Materials Science and Engineering B

Nanostructural Characterization 3D of Phases and Interfaces of Portland Cement MortarWed,
Development of Immunosensor for Early Detection of Aquatic Harmful Algal Blooms (HABs)Wed,
Low Temperature Direct Bonding between PEEK (Polyetheretherketone) and Pt via Vapor-Assisted Vacuum Ultraviolet Surface ModificationFri,
Li2MoO4 Crystals Grown by Low-Thermal-Gradient Czochralski TechniqueFri,
Simple and Robust Direct Drive Wave Power Generation System Using Dielectric ElastomersTue,