Key points are not available for this paper at this time.
Polymeric hole-transport materials (HTMs) have been widely used in quantum-dot light-emitting diodes (QLEDs). However, their solution processability normally causes interlayer erosion and unstable film state, leading to undesired device performance. Besides, the imbalance of hole and electron transport in QLEDs also damages the device interfaces. In this study, we designed a bis-diazo compound, X1, as carbene cross-linker for polymeric HTM. Irradiated by ultraviolet and heating, a poly(9,9-dioctylfluorenyl-2,7-diyl)-alt(4,4′-(N-(4-butylphenyl)) (TFB)/X1 blend can achieve fast “electronically clean” cross-linking with ∼100% solvent resistance. The cross-linking reduced the stacking behaviors of TFB and thus led to a lower hole-transport mobility, whereas it was a good match of electron mobility. The carbene-mediated TFB cross-linking also downshifted the HOMO level from −5.3 to −5.5 eV, delivering a smaller hole-transport energy barrier. Benefiting from these, the cross-linked QLED showed enhanced device performances over the pristine device, with EQE, power efficiency, and current efficiency being elevated by nearly 20, 15, and 83%, respectively. To the best of our knowledge, this is the first report about a bis-diazo compound based carbene cross-linker built into a polymeric HTM for a QLED with enhanced device performance.
Yi et al. (Tue,) studied this question.