Key points are not available for this paper at this time.
Wind-assisted ship propulsion (WASP) has gained considerable interest as a means of reducing fuel consumption and Greenhouse Gas (GHG) emissions, with further benefits when combined with weather-optimized routing. This study employs and extends a National Technical University of Athens (NTUA) weather-routing optimization tool to more realistically assess WASP performance through integrated modeling. The original tool minimized fuel consumption using forecasted weather data and a physics-based performance model. A previous extension to account for the WASP effect introduced a 1-Degree Of Freedom (DOF) model that accounted only for longitudinal hydrodynamic and aerodynamic forces, estimating the reduced main-engine power required to maintain speed in given conditions. The current study incorporates a 3-DOF model that includes side forces and yaw moments, capturing resulting drift and rudder deflection effects. A Kamsarmax bulk carrier equipped with suction sails served as the case study. Initial simulations across various operating and weather conditions compared the two models. The 1-DOF model predicted fuel-saving potential up to 26% for the tested apparent wind speed and the range of possible headings, whereas the 3-DOF model indicated that transverse effects reduce WASP benefits by 2–7%. Differences in Main Engine (ME) power estimates between the two models reached up to 7% Maximum Continuous Rating (MCR) depending on the speed of wind. The study then applied both models within a weather-routing optimization framework to assess whether the optimal routes produced by each model differ and to quantify performance losses. It was found that the revised optimal route derived from the 3-DOF model improved total Fuel Oil Consumption (FOC) savings by 1.25% compared with the route optimized using the 1-DOF model when both were evaluated with the 3-DOF model.
Kytariolou et al. (Fri,) studied this question.