Hydrogen Injection Pressure as a Control Parameter for Combustion, Efficiency, and Emissions in a Spark-Ignition Engine

This study investigates the effect of hydrogen injection pressure on combustion, energy, and emission characteristics of a spark-ignition engine under stoichiometric operating conditions. Experiments were performed on a four-cylinder Nissan HR16DE engine at 2500 rpm and 0.48 MPa brake mean effective pressure using gasoline and hydrogen-enriched blends containing 10%, 20%, and 30% hydrogen by mass. Hydrogen was injected into the intake manifold at pressures of 1.2, 1.4, 1.6, and 1.9 bar, while spark timing was adjusted to maintain peak in-cylinder pressure at 14–15 CAD after top dead center. Results showed that hydrogen mass fraction had a much stronger influence on engine performance than injection pressure. Increasing hydrogen content intensified combustion, shortened ignition delay, increased heat release rate and in-cylinder temperature, and reduced brake-specific fuel consumption by up to 36% compared with pure gasoline. Hydrogen enrichment also reduced HC and CO2 emissions, but increased NOx emissions. Effect of injection pressure was secondary and depended on hydrogen concentration. Under the investigated conditions, the lowest tested pressure, 1.2 bar, was generally the most favorable, especially at lower hydrogen fractions. Overall, hydrogen injection pressure acted mainly as a mixture formation control parameter, while hydrogen mass fraction remained the dominant factor determining engine behavior.