Measurement of dynamic permeability in grazing flows for porous trailing edges

Porous trailing edges attenuate hydrodynamic pressure fluctuations that scatter as trailing-edge noise, with their effectiveness governed by their material parameters. Conventional measurements of permeability rely on steady-flow rigs, which cannot capture the dynamic response of this parameter, which is relevant for predicting balancing pressure fluctuations under grazing-flow conditions. In this study, we introduce a method for directly determining the dynamic permeability of porous trailing edges from time-resolved particle image velocimetry (PIV) data. The approach employs a lumped-system circuit analogy that links unsteady pressure gradients to through-material velocities, enabling in situ characterisation without specialised porous rigs, thereby further extending its applicability to thin trailing-edge geometries. Two materials with similar porosity but distinct internal architectures are compared against a solid baseline: a structured porous trailing edge (SPTE) and a random foam trailing edge (RFTE). The extracted permeability curves show close agreement with the analytical model of Johnson et al . ( J. Fluid Mech. , 1987, vol. 176, pp. 379–402), validating the method for both structured and randomised porous materials. The procedure also allows for the estimation of the equivalent viscous characteristic length and tortuosity. A detailed comparison reveals that the SPTE exhibits a lower viscous length scale and tortuosity than the RFTE, with a relatively higher dynamic permeability response at high frequencies.