Answers are grounded in this paper and cite their sources.
In the present study, the WC-CrC-Ni powder is HVOF sprayed on three different Fe-based steels namely SA213-T22, Oxidation studies have been conducted on the coated as well as uncoated specimens at 700ºC for 50 cycles in air under cyclic heating and cooling conditions.The weight change method was used to establish the kinetics of oxidation.WC-CrC-Ni coated steels showed slow oxidation kinetics and considerably lower weight gains than that of uncoated steels.The superior performance of WC-CrC-Ni coatings can be attributed due to the formation of a compact and protective oxide layer consisting of Cr 2 O 3 , NiO and their spinels like NiCr 2 O 4 and NiWO 4 .The uncoated T22 steel suffered a catastrophic degradation in the form of intense spalling of the scale.The combined technique of X-ray diffraction (XRD), scanning electron microscopy/energy dispersive X-ray analysis (SEM.EDAX) and X-ray mapping were used to analyze the oxidized products of coated and bare substrate steels.
No takes yet. Share an insight, caveat, or question.
Somasundaram et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: