Wide-Temperature-Range Stability of a Compact LNOI Hybrid Plasmonic TE-Pass Polarizer for Fiber-Optic Gyroscope Applications

In this study, we present a thermal-aware design of a compact hybrid plasmonic grating (HPG) TE-pass polarizer on X-cut lithium niobate on insulator (LNOI) for fiber-optic gyroscopes (FOGs). In a three-dimensional simulation, the optimization of the trapezoidal sidewall angle (θ = 78°) and the thickness of the Ag grating (13 nm) yield a polarization extinction ratio of 36.2 dB at 1550 nm (with a peak of 41.4 dB at 1548 nm) within a sub-10 μm grating length. This represents a ~3–8 dB improvement over prior LNOI HPG polarizers at the same footprint. A multiphysics thermo-optic analysis over the wide industrial FOG envelope (from −45 to +85 °C) demonstrates that the operating-wavelength polarization extinction ratio remains within the range of 24.7–36.2 dB across the entire 130 K span (worst case 24.7 dB at −25 °C), constrained solely by a modest 10 pm/K Bragg detuning stemming from the pronounced (~5) thermo-optic anisotropy of LN. The insertion loss exhibits a negligible drift of merely 0.73 dB. A fabrication tolerance study identified the Ag thickness as the predominant budgetary constraint (±1 nm tolerance, PER dropping ~10 dB at the resonance edge), while the ridge width and oxide buffer demonstrated comparatively greater flexibility. The device, therefore, fulfills the criteria for FOG-grade polarization suppression across most of the operational temperature range. The −25 °C point is established at the 25 dB threshold, thereby providing concrete design guidelines for ensuring environmentally stable on-chip polarization control on LNOI.