Key points are not available for this paper at this time.
This work presents a novel and facile method for fabricating paper-based microfluidic devices by means of coupling of hydrophobic silane to paper fibers followed by deep UV-lithography. After filter paper being simply immersed in an octadecyltrichlorosilane (OTS) solution in n-hexane for 5 min, the hydrophilic paper became highly hydrophobic (water contact angle of about 125°) due to the hydrophobic OTS molecules were coupled to paper's cellulose fibers. The hydrophobized paper was then exposed to deep UV-lights through a quartz mask that had the pattern of the to-be-prepared channel network. Thus, the UV-exposed regions turned highly hydrophilic whereas the masked regions remained highly hydrophobic, generating hydrophilic channels, reservoirs and reaction zones that were well-defined by the hydrophobic regions. The resolution for hydrophilic channels was 233 ± 30 μm and that for between-channel hydrophobic barrier was 137 ± 21 μm. Contact angle measurement, X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance Fourier transform-infrared (ATR-FT-IR) spectroscopy were employed to characterize the surface chemistry of the OTS-coated and UV/O(3)-treated paper, and the related mechanism was discussed. Colorimetric assays of nitrite are demonstrated with the developed paper-based microfluidic devices.
He et al. (Mon,) studied this question.